First, de-link the receiver unit from any other possible signals by pressing and holding the flashing blue LINK button on the front control panel. Check the digital menu to ensure "DMX Transmit Mode" is set to OFF. Make sure the physical switch on the control panel is set to RX.
On your transmitter, activate the wireless link process. The blue status light on your LiteDimmer should be blinking rapidly, which means it is searching for a signal. If the wireless link is successful, the status light should be solid blue. If the status light is slowly blinking, de-link your receiver unit and restart the process.
If you are still having issues connecting wirelessly, or if your unit is dropping signal at short distances (6 inches - 5 feet) please contact LiteGear Service at [email protected].
If the unit is still flickering after your troubleshooting, please contact customer service at [email protected].